• This email address is being protected from spambots. You need JavaScript enabled to view it.

Trotex 50 kW Biomass boiler

high quality and tecnology

Trotex 50 kW Biomass boiler
Trotex 50 kW Biomass boilerTrotex biomass boiler sectionTrotex biomass boiler frontTrotex biomass boiler controllerTrotex biomass boiler plant schema

Trotex 50

Trotex, the biomass boiler robust and reliable able to burn it all!

The advantages of the biomass boiler Trotex

  • High-performance brazier (horizontal flame with modulating fan)
  • Heat recovery from the exhaust gases with partial precipitation of dust
  • Compact
  • Boiler body in steel plate 6 to 10 mm
  • Exchanger vertical walls
  • Door with Actuator gas
  • Efficiency up to 80%
  • Intuitive control with Controller Touch
  • Easy maintenance

The fuel for the biomass boiler Trotex

Wood
Wood

Wood chips
Wood chips

Burn it all (pruning, wood waste, sawdust and briquettes)
Burn it all (pruning, wood waste, sawdust and briquettes)
efficiency80 class3

The biomass boiler Trotex is ideal for heating from 100 square meters to 500 square meters with capacity ranging from 25 to 50 kW

Show more details

The boiler steel type TROTEX is intended for supply to the central heating and hot water preparation for a single-family home, factories, commercial spots, stores, etc. , where the supply water temperature does not go over 95 ° C , and the pressure is 0.2 MPa.

The boiler Trotex has a high strength construction so that the steel plates that make up reaching 10 mm thick.

One of the characteristics of the boiler Trotex low combustion control (optional low - high).

The elements of the central heating boiler are sheet from 6mm-10mm - in order to better withstand the aggressive behavior of organic substances.

the heat exchanger of the boiler is a vertical panel and directly above the focus, can be mounted another tray.

the combustion chamber has a grid of iron , ceramic coating and nozzles of gas release and what allows her to have an efficient combustion process.

the boiler Trotex has been designed for the combustion of wood (wood chips, briquettes, wood chips, sawdust, scraps and pruning). The boiler is also suitable for the combustion of regular Carbon , after first removing the tray.

Trotex is reliable and simple to use and does not create problems for use.

The opening of the doors of the boiler is fitted with gas actuator , and allows filling with pieces of wood large enough.

The boiler will burn with a full tank lasts from 5 to 10 hours.

The exhaust from the combustion chamber pass through the wall that divides the outbreak within the rear channels where there is the partial return of the exhaust facilitating partial precipitation of dust and soot.

The boiler is equipped with a electronic regulator that through the ventilator provides the air required for combustion and allows control of the temperature of the boiler.

Fuels

Dry wood

The wood should be placed at least one year of aging (humidity within 20%). The burning of wet wood causes cantrame and reduces the efficiency of the boiler.

Biomass - the dust of wood shavings (seats layer of wood moisture by 20%).

Features of the models

caldaia biomassa trotex tabella

Outline of the construction of the boiler section and Trotex

biomass boiler trotex schema sx
biomass boiler trotex schema dx

1. Extension of the fuel tank

2. Opening the top cover servo

3. Boiler body in sheet thickness of 6-10 mm

4. Combustion chamber made of a single piece of sheet metal with a thickness of 10 mm

5. Adjustable air flow

6. Temperature sensor of the exhaust gas

7. Fuel tank

8. Nozzle adjustment of combustion

9. Ceramic coating

10. Cast iron grill

Schema di montaggio della caldaia Trotex – sistema chiuso

TROTEX biomass boiler system closed

1. Boiler

2. PID controller

3. Expansion tank in closed system

4. 4-way valve.

5. Device for export of excess heat (pevalvolaDBV-1)

6. Circulation pump central heating

7. Heaters

8. Coffee

9. Pump C.W.U.

10. Temperature sensor return

11. Temperature Sensor central heating

12. Temperature sensor C.W.U.

13. Safety valve

14. Login cooling water

15. Hot water outlet

16. Gauge

Controller

Read more
  • Description
  • Specifications

Trotex, the biomass boiler robust and reliable able to burn it all!

The advantages of the biomass boiler Trotex

  • High-performance brazier (horizontal flame with modulating fan)
  • Heat recovery from the exhaust gases with partial precipitation of dust
  • Compact
  • Boiler body in steel plate 6 to 10 mm
  • Exchanger vertical walls
  • Door with Actuator gas
  • Efficiency up to 80%
  • Intuitive control with Controller Touch
  • Easy maintenance

The fuel for the biomass boiler Trotex

Wood
Wood

Wood chips
Wood chips

Burn it all (pruning, wood waste, sawdust and briquettes)
Burn it all (pruning, wood waste, sawdust and briquettes)
efficiency80 class3

The biomass boiler Trotex is ideal for heating from 100 square meters to 500 square meters with capacity ranging from 25 to 50 kW

Show more details

The boiler steel type TROTEX is intended for supply to the central heating and hot water preparation for a single-family home, factories, commercial spots, stores, etc. , where the supply water temperature does not go over 95 ° C , and the pressure is 0.2 MPa.

The boiler Trotex has a high strength construction so that the steel plates that make up reaching 10 mm thick.

One of the characteristics of the boiler Trotex low combustion control (optional low - high).

The elements of the central heating boiler are sheet from 6mm-10mm - in order to better withstand the aggressive behavior of organic substances.

the heat exchanger of the boiler is a vertical panel and directly above the focus, can be mounted another tray.

the combustion chamber has a grid of iron , ceramic coating and nozzles of gas release and what allows her to have an efficient combustion process.

the boiler Trotex has been designed for the combustion of wood (wood chips, briquettes, wood chips, sawdust, scraps and pruning). The boiler is also suitable for the combustion of regular Carbon , after first removing the tray.

Trotex is reliable and simple to use and does not create problems for use.

The opening of the doors of the boiler is fitted with gas actuator , and allows filling with pieces of wood large enough.

The boiler will burn with a full tank lasts from 5 to 10 hours.

The exhaust from the combustion chamber pass through the wall that divides the outbreak within the rear channels where there is the partial return of the exhaust facilitating partial precipitation of dust and soot.

The boiler is equipped with a electronic regulator that through the ventilator provides the air required for combustion and allows control of the temperature of the boiler.

Fuels

Dry wood

The wood should be placed at least one year of aging (humidity within 20%). The burning of wet wood causes cantrame and reduces the efficiency of the boiler.

Biomass - the dust of wood shavings (seats layer of wood moisture by 20%).

Features of the models

caldaia biomassa trotex tabella

Outline of the construction of the boiler section and Trotex

biomass boiler trotex schema sx
biomass boiler trotex schema dx

1. Extension of the fuel tank

2. Opening the top cover servo

3. Boiler body in sheet thickness of 6-10 mm

4. Combustion chamber made of a single piece of sheet metal with a thickness of 10 mm

5. Adjustable air flow

6. Temperature sensor of the exhaust gas

7. Fuel tank

8. Nozzle adjustment of combustion

9. Ceramic coating

10. Cast iron grill

Schema di montaggio della caldaia Trotex – sistema chiuso

TROTEX biomass boiler system closed

1. Boiler

2. PID controller

3. Expansion tank in closed system

4. 4-way valve.

5. Device for export of excess heat (pevalvolaDBV-1)

6. Circulation pump central heating

7. Heaters

8. Coffee

9. Pump C.W.U.

10. Temperature sensor return

11. Temperature Sensor central heating

12. Temperature sensor C.W.U.

13. Safety valve

14. Login cooling water

15. Hot water outlet

16. Gauge

Controller

Want to get the most out of your biomass plant?

schema puffer
Save up + 70%
Ask How to Save Now!

Combines a puffer of 2000 lt. this biomass boiler and save

Inserting a proper Puffer in your biomass plant can reduce 50-70% the fuel consumption to heat your home.

Contact free and our experts will tell you how to get the highest performance from your biomass plant.

Ask How to Save Now!

Specifications

44 ÷ 55 kW
Max 500 m2
78 ÷ 80 %
Class 3
n.d.
260 dm3 ~ 165÷175 kg
Wood, Wood chips, Burn it all
Pruning, Wood waste, Sawdust and wood briquettes
Boiler body with ultra sturdy steel sheets 6 and 10 mm, Heat exchanger with vertical walls, Tray combustion interchangeable, Combustion chamber with iron grid, Combustion chamber with a ceramic coating and release gas nozzles, Door with gas actuator, Heat recovery from the exhaust gases with partial precipitation of dust
Hrizontal flame with modulating fan
Manual
Heat exchanger with vertical walls
Powder coated
Sheet thickness of 10 mm
Adjustment of the combustion process - control / fan for airflow, An automatic system that runs the central heating pump, pump up, and circular, Electronic regulator through the fan that provides the air required for combustion and allows the control of the boiler temperature, The vertical heat exchangers allow the insertion of an additional tray directly above the outbreak, The opening of the safe door is ensured by the actuator gas, Heat recovery system from the exhaust gases ensures the high performance and the partial precipitation of the powders
Command, Fan, Thermometer, A container of ashes, Kit of tools needed to use the boiler, Fuel tank
Extension of the container
75 cm
75 cm
148 cm
134 cm
n.d.
n.d.
810 kg
180 l
0,22 mbar
260 °C
2 bar
95 °C
60 ÷ 80 °C
55 °C
~ 230 / 50 V/Hz
n.d.
37-90 W
Ø 200 mm
n.d.
ST-280 (Optional), ST-809ZPID
5 years for boilers used in accordance with instructions for use, 2 years for electronic subassemblies
CE Mark

Start Save Money to heat your building with a biomass boiler

Filters

How many square metres do you want to heat saving money?:
Which fuel do you want use?
  • 1
  • 2
  • 3
  • 4
  • 5
Ask us how to!

Consulting for a good plant biomass heating

To get the best possible performance from a biomass plant is important to well design the system.
Ask us how to!
Contact us

Work with us!

Rivenditori, Rappresentanti Commerciali, Assistenza tecnica

We are expanding our technical and commercial network.

We are looking for motivated people who can cooperate with us to develop the our sales network throughout Italy.

If you are interested in opening a store or become an official reseller of Fire Power or deal with the marketing of our products, or work as a technical support and maintenance, please contact us.

Contact us